Menu

Job Listings

Tooling Engineer – up to $95K (Direct Hire)

  • Location: Mansfield, Massachusetts
  • Type: Direct Hire
  • Job #1098

Responsibilities:

  • Perform design and build tools for manufacturing functions to meet customer and company specifications
  • Ensure maintenance of existing tooling
  • Perform related diagnostics and troubleshooting as needed
  • Responsible for the manufacturing, quality of customer products
  • Making sure products are being built to customer specifications using drawings or other instructions
  • Ensuring the product is completed in a timely manner
  • Following company procedures, quality management system and ISO 9001
  • Reporting any issues, problems to management
  • Make sure all tooling product is in working order
  • Using Bridgeports, Lathes and grinders

Qualifications:

  • Previous tooling experience
  • Knowledge of ISO 9001
  • Some CNC experience is a plus
  • Mechanical aptitude in troubleshooting progressive dies

Hours are:

Monday through Friday – 7am – 3:30pm

The pay is up to $95K based on experience

Press Brake Operator – $28/hour

  • Location: Walpole, Massachusetts
  • Type: Contract To Hire
  • Job #1094

Abilities and Qualifications:

  • Setup and operate state of the multi-axis hydraulic press brakes
  • Select, position and align various types of brake tooling.
  • Setup with minimal supervision from blueprints and computer stored information.
  • Interpret drawings and create forming sequences with multiple tooling sets with a goal to decrease part handling time.
  • Use bend allowance or set-back to figure bend lines and stock left over.
  • Form simple to complex work to +/- .005 tolerances including short and long runs.
  • Inspect work prior to first inspection and maintain quality parts throughout job.
  • Manual dexterity required for operating machinery and computer.
  • Able to do some heavy lifting.
  • Able to enter job quantities and labor information into computer system.
  • Basic reading, writing and arithmetic skills required.
  • Required to provide own tools needed to perform job
  • Work with management and engineering on special or prototype jobs and testing tools.
  • Able to read and understand work orders.
  • Able to use gauges and precision measuring instruments to ensure accuracy of close tolerance work.
  • Other duties as assigned.

Hours:

Monday through Friday – 7am – 3:30pm or Monday through Thursday 3:30pm – 2:00am

Fleet Mechanic (auto and trucks) $90K/year (permanent job)

  • Location: Stoughton, Massachusetts
  • Type: Direct Hire
  • Job #1092

Responsibilities:

  • Maintain and repair automotive fleet
  • Responsible for preventative maintenance and mechanical/electrical repairs on gas and diesel vehicles
  • Some equipment repairs including forklifts, powered pallet jacks, utility trailers
  • Some preventive maintenance and repairs on snow removal equipment
  • Maintain equipment and safety log books

Qualifications:

  • ASE or dealership is a plus
  • Able to troubleshoot, diagnose and repair equipment
  • Tool box with basic hand tools is required
  • Valid drivers license and good driving record
  • Ability to obtain a DOT card

Hours are:

Monday through Friday – 7am – 4:30pm

The salary is up to $90K a year based on experience

Benefits:

  • Health insurance
  • Dental insurance
  • 11 Holidays
  • Profit sharing bonuses
  • Vacation
  • 401K

CNC Milling Machinist (direct hire) $32/hour

  • Location: Middleboro, Massachusetts
  • Type: Contract To Hire
  • Job #1090

Responsibilities:

  • Setup CNC Milling Machines
  • Load, unload and adjust machine
  • Measurement and blueprint reading skills
  • Basic quality control skills
  • Basic mechanical abilities
  • Measure, cut and work the necessary items
  • Setup equipment from instructions given
  • Run the first piece to ensure machine is running properly
  • Make any changes as necessary

Qualifications:

  • Previous CNC milling machine experience
  • Ability to read blueprints
  • Knowledge of measuring instruments such as: micrometers, calipers, verniers

Hours are:

Monday through Friday – 7am – 3:30pm

The pay is up to $32.00 an hour

Laborer for Event Company – $20/hour

  • Location: Dedham, Massachusetts
  • Type: Contract To Hire
  • Job #1088

Responsibilities:

  • Load and unload trucks
  • Go to customer sites with crews to install and remove equipment
  • Will be driving own vehicle to customer sites
  • Company pays for mileage
  • Typical jobs are within 30-45 minutes of shop

Hours are:

Monday through Friday

6am – 3:30pm but could be longer depending on job

The pay is $20.00 an hour

Quality Inspector – $24/hour

  • Location: Attleboro, Massachusetts
  • Type: Contract To Hire
  • Job #1086

Responsibilities:

  • Achieve and maintain appropriate operator authorization(s) as required.
  • Work from engineering documentation including drawings to determine the appropriate method and equipment necessary to perform inspection.
  • Interpret customer and internal engineering drawings as well as other company specifications and quality requirements to determine if material, components, and product comply.
  • Develop special precision inspection set-up operations that accurately and precisely verify requirements.
  • Interpret ANSI 14.5 geometric dimensioning and tolerancing requirements to determine measure and verify conformance.
  • Perform first piece and/or first article inspection for all levels of components/products in accordance with AS9102.
  • Perform calibration of measuring devices and complicated precision gauges.
  • Use a wide variety of test and inspection instruments/equipment including micrometers, indicators, pressure gauges, hand tools, optical comparators, vernier, and weights.

Requirements:

  • Previous mechanical inspector in a sheet metal shop
  • Able to read blueprints

Hours

Monday through Friday – 7am – 3:00pm

The pay is up to $24.00 an hour based on experience

Production Coordinator for Manufacturing Company – $35/hour

  • Location: Brockton, Massachusetts
  • Type: Direct Hire
  • Job #1084

Responsibilities:

  • Assisting in the daily planning reports, work orders and other documentation needed to meet customer needs
  • Using work methods, problem solving and resolution to make sure work is completed within time frame and within budget
  • Printing packing and work orders to the manufacturing floor
  • Attached documentation to work orders such as: drawings, and other paperwork needed
  • Entering information into computer system
  • Delivering shop orders and getting completed shop orders and taking them to proper person
  • Working with other departments as needed for reprints or routing changes

Qualifications:

  • Previous experience in a manufacturing environment is required
  • Good computer skills including Microsoft Office and manufacturing systems
  • Good attention to detail
  • Strong written and verbal communication skills
  • Experience at Excel and Outlook
  • Software is Estrictrack

The hours are:

Monday through Thursday – 7 – 4:30. Every Friday off (2 breaks plus ½ hour lunch)

The rate of pay is up to $35.00 an hour

CNC Lathe Machinist w/Programming $36/hour (direct hire)

  • Location: Groveland, Massachusetts
  • Type: Direct Hire
  • Job #1082

Responsibilities:

  • Setup, operate and program CNC lathe machines
  • Programming with Mastercam/CamWorks
  • Working with Y-Axis lathe
  • DMG Mori SL2500
  • Setup and operate, live tooling
  • Performing inspection
  • Working with tight tolerances

Requirements:

  • Previous experience with CNC lathe machines
  • Experience with Mastercam/CamWorks
  • Knowledge of live tools
  • Experience reading blueprints, sketches, verbal instructions

The hours are:

Monday through Friday

7am – 3:30pm

The pay is $36.00 an hour based on experience

  • 40 hour sick time
  • Vacation time
  • 10 paid holidays
  • Health insurance
  • Dental insurance
  • Life insurance
  • 401K with company match

Sales Engineer – $80-$100K a year (Direct Hire)

  • Location: Avon, Massachusetts
  • Type: Direct Hire
  • Job #1080

Responsibilities:

  • Working with different departments such as: sales, estimating, quality and manufacturing to interpret customer needs, delivering solutions
  • Working with customers to understand what the need as far as quoting, on going service on existing needs and new needs
  • Developing and delivering product demonstrations, sales presentations to explain solutions for customers
  • Answering customer questions about product engineering, quality and manufacturing and other areas of product
  • Problem solving with customers as needed during the sales process
  • Researching the industry to know what changes are taking place that could affect future and current sales
  • Working with proposals and entering information into system
  • Updating information into the CRM system for tracking
  • Reading and understanding design and specification requirements
  • Using Excel spreadsheet
  • Cost estimates for both materials and other projects needed
  • Run project cost for reviews of project performance
  • Participating in customer meetings and resolving customer issues

Qualifications:

  • At least five years experience in project management/estimating including all aspects of process development and execution
  • BS in Engineering Discipline – Mechanical Engineering preferred
  • Solid Works or AutoCAD experience is preferred
  • Experience with metal fabrication principles and techniques
  • Knowledge of ASME Section 8 Div 1 Code
  • Able to work with ASME code design program – Codeware Compress or similar
  • Proficient in Microsoft Office
  • Proven track record in metal working industry such as product/service to end users
  • Excellent written and verbal communication skills
  • Good time management skills, ability to multi-task

Hours are

Monday through Friday – First Shift

The pay is $80 to $100K a year based on experience

Swiss Machinist Needed (direct hire)

  • Location: Exeter, New Hampshire
  • Type: Direct Hire
  • Job #1077

Responsibilities:

  • Setup and operate Swiss Machines such as:
  • Citizens
  • Tsugami
  • Star CNC
  • Running and setting up machines
  • Able to setup and read blueprints
  • Experience working with blueprints and micrometers
  • Making offset adjustments, sharpen and center tooling
  • Fanuc controls, offset, parameter

Requirements:

  • Previous CNC Swiss machine experience
  • Able to perform basic geometry and math calculations

Hours are:

Monday through Friday – 6am – 2:15pm or Monday through Friday – 2pm -10:15pm

The pay is $33.00 – $36.00 an hour

Benefits:

  • Health Insurance
  • Dental Insurance
  • Vision Insurance
  • Life and accidental death insurance
  • Short term and long term disability
  • 401K with up to 4% match
  • Paid holidays – 6
  • Vacation
  • Sick time

Load More